MikroSkin is a flexible Microcement architectural wrap system that allows you to cover existing cabinetry/joinery with a real concrete-stye finish without demolition or extreme facelift works. You will not need to hire an applicator which will save you greatly.

MikroSkin is designed purely as a DIY system:

1. Roll out the sheet to the desired width you require. (Do not roll out completely!)
2. Cut to size allowing a few centimeters either side.
3. Apply MikroSkin adhesive coat.
4. Allow bond coat to turn transparent (up to 40mins depending on weather)
5. Press pre-cut sheet firmly over panel or cabinetry.
6. Trim edges with a fine blade.

Not at all! MikroSkin is designed to be simple.
Basic care, patience, and following the instructions will give you a clean result.

No more than a few hours to a day depending on experience with tools.

Measure the longest lengths you require which will most likely be your verticle lengths and times it by the amount of faces you need to cover.
‍
It best to use your full sized lengths horizontally to cover all of your drawers and cabinets.
You will utilise the material best this way.